RP-75W adopts 60 gsm white offset paper as
backing, treated with polypropylene and coated with on one side. It mainly used as liner
of label stock, general adhesive tapes. It is suitable for both water-based acrylic
emulsion and solvent acrylic adhesive.
| Features: |
|
|
1.Suitable for both direct coating and transfer
coating method. |
|
2.Cheaper than glassine silicone release paper. |
|
3.Good release performance. |
Typical Physical Properties:
Property |
Value |
Remarks |
Color |
White |
By vision |
Paper: gsm |
60 |
Scale |
Polyethylene: gsm |
15-18 |
Scale |
Total Basic Weight: gsm |
75 |
Scale |
T-Release Force：N/25mm |
<= 0.5 |
PSTC-7 |
| |
*The value of T-Release Force can be adjusted
according to customer's needs. |
Roll Width: 1020mm, 1230mm |
| Core
I.D.: 76mm±1 (3"±1mm) |
| Based
on order, special widths are available. |
|
|
| Packing:
|
| Each
roll is wrapped with Kraft cardboard or ply-corrugated cardboard. |
|
Remarks: |
| 1.The data above are typical results and subject
to change without notice. |
| 2.Tolerance: Basic Weight and Thickness: ± 10%;
Width: ± 3mm; Roll Weight: ± 0.5%. |
| 3.The products should be stored at room
temperature and kept from wet. |
| 4.The users should take test and do
trial-application on the above products before coming into application so as to witness
and ensure suitability for their special purpose and technique. |
JIANGYIN MEIYUAN INDUSTRIES CORPORATION |
HOME
RP-75W SINGLE SIDED SILICONE RELEASE PAPER
